52X Optical Zoom 1080P Anti-Fog Defogging 2000m Laser GPS Security Low Power Consumption Worm Gear and Worm Drive Onvif IP67 IP PTZ Camera

Product Description

Key Features

1. Support mainstream network module in the market
2. Support bilateral equipment warehouse
3. Support laser, infrared thermal imaging, zoom infrared light, ultrasonic, etc.
4. Remote optical axis adjustment: adjustment via IE browser and client software
5. Support wireless antenna transmission
6. Support 12VDC, 24VDC, 24VAC power supply
7. Worm gear and worm drive, with self-locking function
8. Minimum power consumption≤12W
9. Protection grade: IP67
10. Compatible with GB28181, Onvif

Product Highlight

1. Low power consumption, the smallest can reach ≤12W;
2. High reliability, protection grade IP67;
3. Remotely reset the system and upgrade firmware through the network;
4. Support GPS/Beidou, dual-mode positioning and time calibration (optional);
5. Worm gear and worm drive, with self-locking function

Model	SVN-52PTX901L2
Camera
Sensor	1/1.8" Progressive scanning CMOS
Total pixels	2.0MP
Minimum illumination	Color:0.0005Lux@(F1.4,AGC ON), b/w:0.00001Lux(F1.4,AGC ON)
Video resolution	50Hz: 25fps(1920*1080,1280*960,1280*720); 60Hz:30fps(1920*1080,1280*960,1280*720)
Lens
Lens focal length	F=6.1~317mm, 52x optical zoom
Lens aperture	F1.4~4.7,automatic / manual
Electronic Shutter	1/25~1/100000s,automatic / manual
Day/Night Switch	ICR
Fill light	Laser module
Complement distance	<=2000m
Light emission wavelength	808±10nm
Laser chip power	2.0W
Control mode	485 Control
PTZ
Pan Range	360° Continuous
Speed (H)	0.1~50°/S
Tilt Range	-90~90°
Speed (V)	0.1~100°/S
Positioning accuracy	±0.15°
3D function	supports the functions of picture frame enlargement, target locking and field center
Information display	Time OSD, custom OSD
Automatic cruise	Support, focal length matching with PTZ speed, 8 cruise scans
Watch function	On/off, automatically call the preset point after staying in the idle state for a specified time
Remote upgrade	Support remote upgrade of movement and gimbal at the same time
communication protocol	PECLO+VISCA
Real-time angle return	Support real-time angle return or query angle return function
Angle control	Support
Preset points \ cruise	Support 255 preset positions
Driving mode	Synchronous belt
Smart(Optional)
Behavior detection	Cross-border detection, regional intrusion, entry area, departure area, defect detection, rapid movement, personnel gathering, illegal parking, remnant detection, item removal detection
Intelligent Recognition	Face detection
Abnormal detection	Scene change detection, audio steep rise / steep fall detection, audio presence detection, virtual focus detection
PTZ Interface
Communication Interface	1 channel adaptive RJ45 Ethernet port
RS485 controller interface	Support adaptive Pelco-P, Pelco-D and other protocols, baud rate 2400, 4800, 9600, 19200 optional
External input	2 channel alarm input
Output port	2 channel alarm output / 1 channel relay output
Application Programming Interface	Support ONVIF 2.0, GD 28181 protocol, support SDK and third-party platform access
Auxiliary function
Smart wiper	Manual control, speed gear is optional
Fan/heating	Real-time temperature detection, pure physical detection
Waterproof respirator	Built-in 2 waterproof respirators to reduce fog and condensation
GPS positioning	GPS/Beidou, dual-mode positioning and time adjustment (optional)
General
Power Supply	DC12V/5.0A, DC24V/6A
Power Consumption	≤ 88W (minimum) / ≤ 140W (infrared lamp on, low temperature start)
Working Environment	-40ºC~60ºC,0~95%(no condensation)
Protection level	IP67, built-in 4000V lightning protection, anti-surge and anti-surge protection
Installation method	Column, wall, corner
Entry cable	Side outlet
Dimension	L490.0mm×W205.0mm×H350.0mm
Product weight	10kg
Bearing weight	≤5kg (Including module protective cover)
Bearer mode	Side load