4K FHD Integrated Endoscopy System

Product Description

Product name: 4K FHD Integrated endoscopy system
Size: L330xW215xH110mm

Host keys and interfaces

Image Resolution	4K 60FPS/1080P 60FPS
Video storage	Built-in HDD(240G)/Front USB port supports up to 2TB
Video output	HDMI DVI VGA AUDIO USB
Foot switch	FOOT SW
Work environment	-10ºC~50ºC
Rated power	<48W
Product noise	37dB(A)
Weight	8kg
Size	L330xW215xH110mm

Operating principle
The handle camera and guide beam are connected to the main engine of the endoscope camera system and then extended to the surgical site to accurately illuminate the lesion. The handheld camera will randomly track and record the diseased tissue irradiated by the endoscope in real time, and send electrical signals to the image processing system. After processing by the image processing system, the video signal is transmitted to the display screen or external image monitor for image display.

Application
This product is used in medical institutions and is connected to an endoscope during endoscopic diagnosis or treatment. The image of the field of view area of the human body cavity observed by the endoscope is acquired, processed and transmitted to the monitor.

System operation Parameter
* Working Ambient Temp: -10°c~50°c
* Power: AC100-240V
* Set up the equipment in the following sequence
* Connect AC power: Connect the Ac power adapter to the power inlet on the rear panel, label"21" on the Host button and l/0 diagram (front & rear panel).
* Observe the 4-pin opening of the connector facing up, and note that the stability of Ac power will affect the shutdown of the camera system and the loss of surgical images.
* Connect the Endoscope in use to the Host according to the Host power and 1/0 diagram(side panel)
* External Video input (if used as a monitor) (4K model only)
* The Host supports HDMI inputs, refer to the Host power and l/0 diagram (side panel)

Use:
* Switch on the main power on the rear panel.
* Insert USB flash disk.
* The Recorder is now ready to use, including video record and photo capture

Maintenance
* Use ammonia disinfectant to clean the outside of the equipment.
* To keep the system clean, gently wipe the surface of the device with a soft wet cloth (gauze) soaked in warm water or added with cleaning agent at least once a month, but absolutely avoid liquid infiltration into the system.
* Do not use ethylene ethylene oxide or other organic solutions to prevent damage to the housing of the whole machine, and do not use any solvents, polishes and original brighteners.
* Avoid using flammable and explosive liquids for cleaning and disinfection. If unavoidable, these liquids must be evaporated before the equipment is turned on.

List of Accessories

Name	Quantity
Recorder	1
Power Cable	1
Foot Switch (Optional)	1

Disposal of waste and residue
Do not discard discarded batteries and hosts at will, and the disposal of waste and residue should comply with the corresponding national laws and regulations.